How to Remove Stains from Concrete Floor

There are times when you feel that getting stains off your concrete floor has become a tireless job that you just have to keep doing without much of a reward. But it does not have to be that way. Rather, you can actually have a much easier time dealing with stains on concrete floors.

You want to know how? Well, we have just the right ingredients you need for an easy job. And after reading this article, you will feel like you have sufficient knowledge to tackle the floor situation on your own very well.

So, let’s get to learn how to remove stains from concrete floors.

How to Remove Stains from a Concrete Floor

Here we will discuss what you will have to do to clean and remove stains from your concrete floor, and then we will also look into a few tips and tricks so that the floor can be protected from harm or damage.

Step 1: Line up All the Supplies

Before you are to start any type of work, it is essential that you set aside the items you are going to need. Much like you do for cooking, you measure everything out and keep them all in the same place so that you do not have to keep looking for what you need.

Stain Cleaner

The same goes for cleaning the floors. You have to select the equipment you will use for the cleaning and the supplies. In this case, you will need a broom, nylon brush, and some type of solution. The kind of solution you choose will depend mainly on the type of stain you are dealing with.

Step 2: Move Items away from the Area You are Cleaning

Now, for you to be able to have complete access to the floor you have to clean, it is very important to ensure that there is nothing placed on it. Therefore if there is a carpet, furniture, or other items placed on the concrete floor that needs cleaning, then set them aside.

Otherwise, you will have to do double the work as you have to constantly work around the items and be careful not to get water on the furniture or carpet.

Step 3: Clean the Dirt and Dust off the Floor

Before you start the work with water and solution, you must first make sure there is no dirt or debris on the floor. If there is, then you will have a harder time removing the stain.

So, to rid your floor from the dust, you can either choose to use a broom or even a vacuum cleaner. I would personally recommend a vacuum cleaner as it will be much faster than a broom. But, both of them will do a fine job on the surface.

Step 4: Remove the Stain with the Spot Treatment

At times it is very important for you to moping the concrete floor to make sure you have a clean and hygienic environment. But there are times when a mop is just not enough for a clean-up job, that is especially true for stains. These will require the use of different solutions.

  • If the marks or stains you are dealing with is normal, then all you need to do is mix water and some dish soap together 1:13 ratio. And then just scrub the floor with it.
  • For an oil-based stain, you do not need to dilute the mixture, rather first wet the spot and the take the dish soap on a brush to scrub it off. Later use a rag to dry the wet spot.
  • Grease stains are the hardest to remove as it involves a rather lengthy process. What you have to do is sprinkle corn-starch on the affected area and keep it there for three to four days. After that, you have to either a broom or vacuum the powder off.

Step 5: Tougher Solution

In most cases, you have to be careful about how harsh the solution is as it might damage the concrete floor. But that does not have to be the case for the plain concrete floors. You can be harsher with the solution and mixture as they are safe from damage.

Also, you can even clean this type of concrete with bleach, and that should be fine. However, just because your floor is safe does not mean your hands are as well. So keep in mind to put in a pair of gloves before you get to work.

Keep the Concrete Floor Protected

Prevention is always better than cure, and that is one rule we must follow for the concrete floors as well. It is better to make sure the floor does not develop any type of stain, so you do not have to work to get it off. So for that, there are a few things you can follow.

Tips 1: Apply Wax on the Concrete

The concrete is a very rough surface, so by applying a wax finish, you will be smoothing out the roughness. All the while, you will also be applying a protective layer on top. The smooth finish will enable you to clean it faster, and you will also have less stress about the stain.

Tips 2: Wipe away the Spillage

The reason why we experience food stains on the concrete at times is that we allow the food to dry up on the floor before cleaning it up. That drying process leaves a stain on the floor. So, if you wipe away whatever falls on the floor, then you can easily avoid stains.

Conclusion

Most of the time, cleaning up any type of stain can involve a lot of labor and hard work. But, all this is worth it when you have clean and presentable floors. Just use the right technique and products, and you should be good to go!

Click Here to Leave a Comment Below 0 comments