Archive

Category Archives for "Blog"

What Can I Spray On Carpet To Stop My Dog From Peeing?

Potty training is undoubtably the hardest part of puppy training. You certainly need a lot of patience and perseverance when trying to teach your puppy where they should be going to the toilet, be that outside or on puppy training pads. Unfortunately, even the most attentive and clever puppies have there down days and you can be sure that they will miss their toilet spot multiple times. In a house with predominantly carpet flooring this can be a very big problem. It is urged that pet owners dedicate a room of their house without carpet flooring to home their puppy whilst they are being potty trained.

If your house has no other flooring than carpet, then you will need to learn some behavioural training techniques and purchase both cleaning and repellent solutions to keep your carpet in good shape. These products are out there, but it can be difficult to find a good, affordable solution to this issue without some insight into the market.

Potty training

Below are the best sprays which help to stop your dog from using the carpet as their toilet.

1. Vinegar

Using vinegar is a great, natural solution to both remove and deter your dog from weeing on your carpets. To remove these smells completely you should use a 50:50 mix of water and vinegar pour the solution on to the stained area and give it a scrub. This removes the smell instantly; it also hides this smell from your dog, so they do not get used to this area and think of it as their place to go to the toilet.

With this natural remedy some people also use baking soda, this can neutralise the smell and really lift the stain from your carpet. It is advised to leave the baking soda in this area until it hardens, that way you can easily hoover up the area afterwards.

2. Citrus-based sprays

This spray can be devised from cupboard staples with ease, it will work as a repellent for your dog and it will freshen up any room or carpet it is used on. A citrus-based spray should be made from either lemon or lime juice and water, it is really important to use natural fruit to make this mixture. Anything made from artificial flavoured items or essentials oils can be toxic for your dog, so ensure only fresh ingredients are used.

3. Cayenne Pepper or Chilli Pepper

It is believed that if you sprinkle either cayenne pepper or chilli pepper powder over the carpeted area which your pet chooses to pee it acts as a natural deterrent. This works due to the natural reaction your dog has before going to the toilet they sniff around that area, if they then smell this strong, hot scent they will be less likely to re-visit that area. This solution might be good for a one off shocking tactic for your dog, if they continue to smell this fiery concoction they could damage their nasal passage so please use sparingly.

4. Ammonia

Using ammonia is a very cheap solution to dog pee stains which actually works, but it can take a few doses before your pet learns not to pee on your carpets. This solution is not so eco-friendly either, it destroys any plants or insects that are in its trail, so if you have a lot of house plants it might not be the correct deterrent to use.

5. Enzyme spray

There are many sprays which you can purchase on the high-street or online with ease that will both clean and deter your pets from using the carpet as a toilet. Most of these sprays are made with the pet’s safety in mind, but you should be extra vigilant with brands that are not as well-known or reviewed as others. A few, especially good, enzyme sprays are listed below –

1. Amaziing Solutions Pet Odor Eliminator and Stain Remover

Amaziing Solutions Pet Odor Eliminator and Stain Remover

This spray is great for tacking fresh urine stains made on carpets by your pets, however it is not the correct spray to buy if you are looking to get rid of old stains on carpets. This product also hinders pets from going back to this area after it has been scrubbed.

2. BUBBAS Super Strength Commercial Enzyme Cleaner

BUBBAS Super Strength Commercial Enzyme Cleaner

This enzyme cleaner is formulated to removes stains and odours effortlessly. Whilst it is pet-safe and environmentally friendly, it has a very strong, chemical smell which might deter some homeowners. Regardless, this still a great product which can be used on multiple surfaces without causing any damage.

3. Rocco & Roxie Professional Strength Stain & Odour Eliminator

Rocco & Roxie Professional Strength Stain & Odour Eliminator

This product can be used on a variety of surfaces, including carpets, and it is great for tough and stubborn stain removal. It is free from harsh ingredients and help deter your dog from visiting the same space twice.

These are some of the few ways that you can get your dog to stop using your carpets as their toilet, listed are both natural and shop bought solutions to help you with this. What we have not discussed is training, this is the best method to help stop your pet from weeing inside your house. If you are able to give your pet the time that they need to fully understand that you do not use the carpet or inside as a toilet and teach them to go outside, or in their designated toilet area indoors.

For your training sessions to go smoothly you will need a lot of treats, encouraging words and patience. Once your dog is aware of where they need to go to use the toilet, they will genuinely want to do it, if they know they will make you happy and get a reward. It is a teamwork effort, if you and your dog work together then it will be a walk in the park. Start as young as possible to reinforce this good behaviour, that way it is easier for them to understand and not make as many mistakes in the future.

Are Robotic Vacuums Good for Pet Hair?

There are many varieties of robot vacuums now available on the market; there popularity has peaked in recent years. At first these devices were considered as another tech-based product, championing new technology over actual capability. Now as this market has grown, so to has the power and usefulness of its products.

As robotic vacuums have grown in popularity and capability, some have become specifically designed to tackle pet hair and messes. These designs have gained a lot of interest, as it is such a time and energy saver for pet owners hoping to keep their houses clean of pet debris.

However, some still question their operating skills when compared to traditional vacuum cleaners, asking for a complete list of pros and cons when the two products are compared and to find out what robot vacuum cleaner is considered the best one to tackle pet hair.

Do Robotic Vacuum Cleaners Work Better Than Traditional Vacuum Cleaners?

Robotic vacuum cleaners are a great investment for those that live busy schedules; many owners find that their floors can be cleaned twice a day in some cases whilst they busy themselves with other jobs. Now robotic vacuums can navigate themselves back to their charging points, get fully charged and continue cleaning messes across your house with ease.

Robotic Vacuum Cleaner

Granted, there are some predicaments that could cause chaos in a pet friendly house. If you have a lot of pet food out, if your pet relives themselves on your flooring whilst you are not there to clean it then a robot hoover may try to clean these spots. This could make more mess than was there initially as the robot hoover will see this as debris that it can clean up, when in fact it cannot.

Traditional hovering can be backbreaking pushing around a chunky powerful machine and can take up a lot of your time. Whilst most traditional hoovers offer a brilliant finish, those owners with large houses or limited free time do not want to spend their time doing chores. Robot hoovers takes the pain out of vacuuming, making it an easy, quite fun experience.

It seems that their actual capabilities now are matched, the only difference between robotic and manual vacuums is the level of knowledge and time you have, or are willing to learn or give, to ensure they run exactly how you would like them to. Old school manual vacuuming may be more suited to an older audience or for those people with a small surface area to clean. Robotic vacuums are preferred by first adopters to new technology, people with large houses and little free time and those that find it a struggle to physically vacuum their houses.

The Pros of Using Robotic Vacuum

  • There are many different cleaning modes to be experimented and better target your specific cleaning needs.
  • Many robot vacuums have angled brushes attached to better clean those hard to reach areas and corners.
  • They now come with an option to purchase both a vacuum and hoover, 2-in-1 products.
  • They can navigate themselves back to their charging points with ease, re-charge and continue cleaning your house.
  • They are more powerful now, offering certain added fixtures like a rubber surface suction port, offering a more thorough clean.
  • They usually come with dirt detect technology, so no debris gets missed when cleaning.
  • They can be programmed to only clean certain rooms or areas with ease.

The Cons of Using Robotic Vacuum

  • Robotic vacuums do not cope well with wires and cables.
  • Certain flooring can cause navigation issues (shiny flooring, black flooring etc.)

What's The Best Roomba For Pet Hair?

The best Roomba on the market at the moment for collecting pet hair has to be the iRobot Roomba i7+. This model is fully equipped with powerful suction that can deliver up to ten times the air power of other Roomba models.

The Roomba i7+ offers its users dual brushes, made to get and lift pet hair and has been designed to capture 99% of dog and cat allergens, as well as mould, dust mites and pollen.

The i7+ cleans itself onto a clean base, meaning that the user does not have to worry about emptying its disposal bin for over 60 days, making it a great time saver. The vacuum is compatible with many smart home platforms, this means you can speak to your robot vacuum through your Alexa or Google Home device and give it navigation directions or other orders, which is a massive technological advance.

The Roomba i7+ is an extremely luxurious robot vacuum, but it has received brilliant reviews for cleaning up after pets and just generally keeping your house fresh and clean with ease.

How To Wring A Mop Without A Wringer | Pet Vacuum Lab

When it comes to cleaning the last activity on the list is usually mopping, it’s not something many of us enjoy doing, but it is a cleaning task that does need to be completed to give your house the finished look. But what do you do if you don’t have a mop bucket? Can you still wring out a mop to make sure that you aren’t cleaning the floors with dirty mop? Don’t worry, we’re here to help. We’ve found the best ways to help you wring out a mop so you don’t have to call your mum and ask for help.

Wring The Mop By Hand

For this you should be wearing a pair of rubber gloves. Not all cleaning products are safe on skin, so you want to make sure you are well protected. Most people don’t realise that they need to wring the mop prior to mopping, this removes excess water and dirt from the previous use. Once you’ve got your gloves on, fill your sink with warm water and cleaning product and pop the mop in.

rubber gloves

Once the mop is saturated, pull it out so you can access the head without dropping it and then twist it to remove the water. You will want to use two hands and wring out as much as you can. You don’t want a soaking wet mop on your floor, so repeat the process until there is no more water coming from the mop. You should mop all of your floors until they are slightly damp but clean and then you want to repeat the wringing process and mop again. The second time you mop will remove all the excess water, so you don’t have to wait too long for your floors to dry.

Get A Self Wringing Mop

If you don’t like the idea of wringing a mop by hand, then look for a self-wringing mop. If you don’t want to have a bucket taking up valuable space in your home a self-wringing mop is an excellent way at reducing clutter. These have a mechanism that allows you to twist the head and remove all the dirty water from the mop.

You can do this over the sink to make sure that the waste water has somewhere to go. Self-wringing mops can come apart quite easily, especially if you try and wring them too harshly, so make sure you are gentle with it when you are trying to remove the excess water from the head.

Lever Mops

Some of us really are averse to mopping and that’s ok, if you really don’t want to spend time wringing out as mop in any capacity, look for a lever mop. These tend to be flat and long and instead of a traditional mop head they use sponges. These mops are very simple to wring out, all you need to do is hold it over a sink and push the handle down to squeeze all the dirty water out.

You will need to clean these more regularly than a traditional mop head as they don’t cover the same amount of surface area, but they take up less space and you can change out the heads quickly when they get too dirt. As they are smaller they are also faster to dry, so you won’t be putting a damp mop away that has a potential to start smelling in your cleaning cupboard.

Micro Fibre Mops

You can now purchase mops that don’t need to be wringing, by hand or by bucket if you don’t want to. These micro fibre mops are an excellent way to keep your house clean with very little effort on your part. When used dry they will pick up dirt, debris and hair, so if you don’t want, you don’t have to wet mop, ever! If you do want to use it wet all you need to do is fill the sink with your normal cleaning product and hot water, pop the cloth in and then wring it out like you would any other cloth. You can then attach it to the mop plate and start using it.

Micro fibre mop

If you are using the cloth wet, it really is exceptional at picking up dust, dirt and debris, so you will have to take it off the mop and wring it out by hand on a regular basis to make sure you aren’t spreading dirt around your house. Once you’ve finished wet mopping, simply throw the cloth into the washing machine and attach a dry one, you can whizz around your house drying the floors in no time. Remember, when you are hand wringing the cloth, you will need to wear rubber gloves as some cleaning liquid can be corrosive against skin.

Final Thoughts

If you don’t want a mop bucket in your house that takes up valuable space, there are ways that you can wring out your mop over the sink. If you have a traditional fixed head mop, pop some rubber glove on first and then twist it over the sink, repeat this process until no water comes out of it and then you are ready to start mopping.

If you don’t like the idea of touching the mop head, get a self-wringing mop! You can still do this over the sink, but instead of you twisting the mop head, there is a mechanism on the handle that does this for you. Finally, if you want to avoid wringing out mops all together, go for a micro fibre mop where you can change the clothes regularly, so you never have to get your hands dirty. There are so many different types of products available, so you will always be able to find one that suits your needs.

How to Clean Carpet with Vinegar?

Are you looking for a homemade carpet cleaning solution? And do you want to turn the hardest job into the easiest one? Then, this cleaning guide is only for you. Today, we will present you with a researched review on “how to clean carpet with vinegar.”

Alright, vinegar is a common liquid item contained with acetic acid and water. And, you are probably familiar with the particular product in your different daily needs. However, have you ever thought that this might be a perfect solution for your carpet stains?

Yes, over the years, people have been taking advantage of the vinegar solution for their carpet cleaning job. Experts say that it is a naturally versatile cleaning agent for wiping out stains and killing germs from anywhere on the surface.

You know that carpet is highly prone to absorb liquors like coffee, red wine, water, milk, and fat item. And consequently, it leaves visible stains that mar the overall aestheticism of the carpet. With the simple process and lease endeavor, only vinegar can be the right company to remove these sudden contamination.

So, have a close look at the detailed guide to learn the true technique of cleaning carpet with the vinegar solution.

Cleaning carpet with vinegar: Four effective solutions to consider

Cleaning carpet with vinegar

For sure, vinegar is the best solution to carpet stains, but some of the mixes can make it more cost-effective, eco-friendly, pet, and kids-friendly. And you can try them at home with some of the very common ingredients.

1. Vinegar with Baking Soda

The mixture of vinegar and baking is one of the best solutions for carpet cleaning. Baking soda or bicarbonate of soda is smoothly soluble in water. The combination of tough acetic acid and bicarbonate soda makes a perfect solution to beat even the hardest stains of fabric.

Required Ingredients & instruments:

  • Vinegar
  • Baking soda
  • Water
  • Vacuum Cleaner
  • Brush or cloth

The process to prepare the mixture:

  • First of all, add one spoon of vinegar to one liter of water in the spray bottle
  • Then, sprinkle baking soda on the entire carpet for 30 minutes before vacuuming
  • Finally, clean the carpet with a brush or cloth and let it dry

2. Vinegar with hydrogen peroxide

As an oxidizer and disinfectant, hydrogen peroxide is a popular name in the cleansing jobs. And when it comes to vinegar, it offers a wondering outcome to vanish carpet stains. It is an inexpensive and easily available compound. Let’s find the required ingredients and mixing process.

Required ingredients & instruments:

  • Hydrogen Peroxide
  • Vinegar
  • Paper towel &
  • Vacuum Cleaner 

The process to prepare the mixture:

  • Firstly, pour some concentrated hydrogen peroxide in a spraying bottle and vinegar in another one.
  • Now start spraying vinegar in the stained areas followed by the hydrogen peroxide. And you need to ensure two simultaneous jobs immediately.
  • And then blot the stains with a paper towel but never try rubbing on the carpet.
  • Finally, start vacuuming to dry the area and make the carpet moisture-free.

3. Vinegar with detergent

Dishwashing liquid or soar is a standard cleaning component available in almost household. The reaction between vinegar and detergent creates lots of bubbles, most useful in deleting tough stains and rough soil from carpet.

Required ingredients & instruments:

  • Vinegar
  • Detergent
  • Spray bottle & water
  • A clean absorbent towel and a clean sponge

The process to prepare the mixture:

  • Add the detergent to the vinegar solution along with warm water and keep them into a spray bottle.
  • After vacuuming the affected area, spray the mixture on the surface.
  • And continue dabbing with the cleaning cloth on the stained part until it removes thoroughly.

4. Vinegar with salt & essential oil

The mixture of vinegar and salt is one of the most eco-friendly cleaning solutions. You can try by yourself to wipe stains and germs from your carpet. In no time, it works effectively to remove fresh stains of fruits or other liquids.

Required ingredients & instruments:

  • Salt
  • Vinegar
  • Essential oil & water
  • Spray bottle

The process to prepare the mixture:

  • First of all, add half of a cup vinegar to some water in a spray bottle
  • Then add one teaspoon of salt and eight to ten drops of clean essential oil in the bottle.
  • Now spray the mixture on the stained part of the carpet and keep blotting with the cleaning towel.
  • Finally, vacuum the carpet and let it dry and germs-fee.

A Detailed Guide to Clean Carpet with Vinegar

We would like to go through the detailed guidelines step by step. And we hope that you will follow these steps to have the best cleaning experience with a vinegar solution.

Vacuuming

The first and foremost important job is to remove dust, debris, and dirt particles from the cleaning surface. You should make sure that no rugs exist there, because it may mar the color and fabric of your carpet. To do the job, you need vacuuming first with a precise vacuum cleaner.

Vacuuming

While vacuuming, make sure that you are operating your vacuum cleaner back and forth or in all directions. It will eliminate all forms of dirt & dust and allow you to focus on removing stains from your carpet.

Making a Vinegar Solution

Now, you need to prepare a vinegar solution with the components above, whatever you like. You can make a concentrated cleaning solution with baking soda, hydrogen peroxide, detergent, and salt. Although these are harmless solutions, you should apply them to the limited space before spraying on the whole carpet.

Never try any harmful chemicals to avoid shrinking and damaging the fabric and color of your carpet.

Scrubbing the Carpet

Get started blotting on the stained regions with a soft sponge or cleaning cloth. You should continue rubbing to eliminate visible spots, invisible germs, and odors. Vinegar has an incredible ability to diminish bad odors. You can take advantage of scrubbing on the carpet.

Scrubbing the Carpet

Never forget dipping the sponge into the mixture in the regular interval. And continue the job in the linear motions to the direction of your nap. It may take time to go through the entire carpet. So be patient and complete the process as per directions to get the best outcomes.

Rinsing the Carpet

You should never forget this particular step of the cleaning process. You may take it as the final stage where you must rinse out all the solutions. Otherwise, it can leave serious stain and fabric damage to your carpet. Water is the only solution to eliminate the cleaning components.

You can do the job in the running water with a hose pipe taking the rug outside. Spray water until no solutions exist on the rug. If you do the job indoor, you can use a cleaning cloth. Dip the cloth in the clean water and rinse at the similar motion of applying the solution.

Removing Excessive Moisture

Unless you wipe moisture out of your rug, it can cause bad odors and even new yellow stains. That’s why; this is one of the most crucial steps ever we narrated here. The professional suction machine can be a proper solution to the issue. If you don’t have anything like that, you can apply some natural tricks and techniques.

Hang your rug in a suitable place wherever you do prefer. But never let it fall down to avoid breaking or tearing off. A famous window cleaner can be another solution to remove water from rugs after rinsing. It’s a little bit time consuming but works better to protect carpet from bad odors, mildew, and mold.

Drying the Carpet

Although you have removed excessive moisture, it requires drying the rugs. It would be much better if you can do the job under the sunshine. Never forget checking that both of the parts have been dried equally and properly. It may take your time and labor.

If you cannot take your rugs outside for drying, you should open the window and let some air circulate. And to hasten the job, use some fans to the carpet. It can be a great idea to dry up the rugs indoor, having less effort.

Factors to Find before Starting Cleaning Carpet with Vinegar

Carpet is an integral part of the home aestheticism. And it is certainly an issue of worth investment. You would never like to damage your favorite rugs for cleaning purposes or something like that. So, have a close look at the following precautious issue before starting cleaning with the vinegar.

Types of Stains

All stain substances are either acidic or alkaline. In this case, you need to understand what the vinegar solution is suitable for which substances. Experts opine that alkaline solutions suit acidic stain, and the acidic mixture is vice-versa.

Vinegar is highly acidic that contains 2.4 pH levels with antimicrobial and antibacterial properties. Therefore, it would be a perfect choice for alkaline stains caused by pet urine and red wine. And you wouldn’t get a good result using vinegar on the acidic properties like soy sauce and ketchup.

Carpet Fabric

You should take carpet fabric into your account to clean with vinegar. From expert research, we find that the vinegar solution is not applicable to the carpet fabric made of natural fibers, wool, and silk. It can permanently deface carpet color and fabric.

Cleaning Technique

How much success will you get from vinegar? It remarkably depends on the cleaning method, whatever you are applying. For example, to remove wet stains, you should use cleaning cloth and fresh water. To get the maximum results, just blot the stained rug with a diluted vinegar paper towel.

No Rubbing

Never try to rub on the dry stain. It can damage the overall appearance of your carpet. You can gently scrape off the residue on the dry stains. And ensure that you are using water-diluted vinegar for carpet cleaning.

Answers to Some Common Questions

In our research, most of the users have some frequently asked questions that are quite valid in this niche. Let’s find some of them.

Q: Will vinegar damage the carpet?

Q: Why should you choose natural solutions?

Q: Should I remove pet hair before cleaning?

The Final Verdict

We consider the total care of your carpet. After that, we have presented you with this researched review to have a healthy and stain-free rug indeed. We hope that if you go through the stages mentioned above, you would be able to ensure flawless carpet cleaning with vinegar. Happy Cleaning!

How does a vacuum pump work? – Every Vacuum User Should Know

From commercial needs to decorative finishes, vacuum pumps are very familiar devices across the world. We usually use vacuum pumps for sucking dirt and dust from carpet, floor, and furniture. And in manufacturing industries, people do use the machine for creating vacuum-packed seals or eliminating air out of electric bulbs, and so on.

Based on the pressure ranges, manufacturers produce different types of vacuum pumps, such as primary, booster, and secondary pumps. And following the technical application, there are two major categories of pumps, like the transfer pumps and the trapping pumps.

Furthermore, you may hear the name of the rotary vane, screw, liquid ring, and dry claw vacuum pumps. The designers have designed all of these vacuum pumps with almost the same working principles for various jobs. However, it’s hard to understand by the users how does a vacuum pump work?

Today, in this review, we will try to make you realize the principles of the electromagnetic functions of theses vacuum pumps. So, let’s have a look.

Vacuum Pumps: Basic Physics of Working Principle

A vacuum pump works by removing air molecules and other gases from the vacuum chamber. And it induces pressure between the low-pressure region and the high-pressure area. The basic guiding principle is that molecules in the air tend to rush from low-pressure to high-pressure areas.

Here, the tornado can be the best example to understand the execution principle of a vacuum pump. You know that when the tornado occurs, the cyclonic air rapidly rushes from the low air pressure region to the high pressure. Regardless of the varied designs, this is the basic physics of the working principle of a vacuum pump.

An Overview of Vacuum Pumps Types, Uses, and Applications Tactics

You have already known that there are many forms of vacuum pumps, but their working theory is the same. The regard to wet or dry pumps, manufacturers applies different technological know-how and operational system.

For instance, the wet pumps require oil or water to generate lubricants while pumping air or gas vacuums. On the contrary, the dry pump is fluid-free, which depends on solid clearances between the static and the rotating parts of the machine.

Here, it’s significant to mention that fluid-contamination is a big issue for the vacuum pumps. In this regard, dry pumps cause less contamination than wet pumps. And you cannot simply change the vacuum system from the wet to the dry one.

Let’s find all of these considerable issues following the vacuum pumps step by step.

Primary Pumps: How do they Work?

Oil Sealed Rotary Vane Pump-Wet and Positive Displacement

Backing or the primary vacuuming pumps can be of rough and low genres, depending on the pressure ranges. The wet and positive displacement vacuum enters the gas inlet, and an eccentrically mounted rotor compresses the gas and finally transfers to the exhaust valve. The spring-loaded valve can discharge gas when excessive atmospheric pressure happens. The operational parts of the particular vacuum are as below.

  • Inlet
  • Exhaust Outlet and Exhaust Valve
  • Pump Oil and Oil Reservoir
  • Stator, spring, blade, and rotor

The oil-sealed pump uses oil to seal and cool rotary van when needed. The rotary pump stabilizes pressure using its number of stages and levels of tolerances. Oil sealed vacuum pump can perform with an average pumping speed of 0.7 to 275 m3/h.

Booster Pumps: How do they Work?

Roots Pump-Dry & Positive Displacement

Manufacturers supply booster pumps of two types one is a low-pressure vacuum, and another is a rough-pressure vacuum. Roots pump is a dry displacement booster vacuum pump that removes a large amount of gas to generate a remarkable volume of pressure. It has two lobes mesh to transfer gas in one direction, avoiding counter-rotation and touching one another. The basic parts of the roots pump are as follows.

  • Gas-inlet
  • Gas-outlet and
  • Lobes mesh

However, roots booster pump can have two or more lobes mesh, and it can generate average pumping speed 100,000 m3/h. And it can boost both the pumping speed and the ultimate pressure to offer you the finest vacuuming experience.

Secondary Pumps: How do they Work?

Vapor Diffusion Pumps- Wet & Kinetic Transfer

As a high-velocity heated oil stream pump vapor diffusion transfer kinetic energy to gas molecules from the inlet to the outlet. It ensures reduced pressure to the inlet and excessive pressure to the outlet. Vapor diffusion is a turbo-molecular pump that comprises the following operational devices.

  • Oil and gas molecules chamber
  • Fourth-stored compression stages
  • Water cooling coils
  • Boiler and heater
  • Oil pumping and backing pump device

The wet and kinetic transfer pump offers maximum performance at a low cost. It’s a highly reliable vacuuming pump for commercial purposes that confirms 10-50000 I/S average pumping speed.

Transfer Pumps: How do they Work?

In the market, transfer pumps are also familiar as kinetic pumps. It has a piston to create momentum, pushing gas around the pumps. And the momentum keeps flowing from the inlet to the outlet of the device. Along with other parts, the piston accelerates gas and air molecules to create an area of low pressure. Later, the air molecules and gas start moving from the lower-pressure region to the higher-pressure area.

  • Piston or propeller-like device
  • Inlet and outlet valves
  • Vacuumed container

When it removes a large volume of air molecules through the outlet valve of the pump, a closure valve works to prevent further entrance of air or gas. And thus, the transfer pumps work better to ensure an excellent vacuuming environment.

Trapping Pumps: How do they Work?

A chemical reaction is an operational system of trapping or capture pumps. And the pump uses the condensation or the thin film produced by the molecules in the air. When the chemical reactions take place inside the vacuum pump, it starts sucking dirt or dust from the surface or carpet.

People use the chemical process pumps in the pharmaceutical industries, process industries, and cooling, heating, and air-conditional plants. This pump is available in the market with multiple suction capacity and head ranges.

Last but not least!

In our daily business, we use vacuum pumps to meet different needs like medical suction, decorative finishes, trash compacting, glass coating, and sewage systems. But we don’t know how a vacuum pump operates. And that’s why, sometimes, it becomes hassling to handle the device with due care.

We hope this review has answered your question, “how does a vacuum pump work?” Have a happy day!

How To Keep The Floor Clean Everyday? Natural Floor Cleaning Technique

Who likes the sight of dirty floors? Literally, no one! So here we are with the tips and tricks on how to keep the floors clean everyday with fewer hassles.

Cleaning floors might look like a tedious job, but if you are taking the right steps at the right time, it will become a cakewalk. We understand that there are different types of floors, and each one of them has different cleaning requirements. However, if you are keeping one strategy in mind, the floors will remain as clean as possible with pleasing sheen and shine.

Why we skip cleaning the floors every day

According to a survey, 3 out of 5 people wait for the weekend to clean their floors. Whether they have the best vacuum cleaner of the time or the most trusted mop and bucket combo set, the devices remain closed in the closet only to come out on the weekend.

No matter whether you have a big house or small apartment, house with kids and pets, or living all alone, the floor will get dirty. You can blame it on the dirt and dust coming from the windows or the filth and grime you bring unintentionally through your shoes.

Cleaning seems tiresome, even if you have the best cleaning devices at home. Isn’t it? But, thanks to some handy and troubleshooting approach that can help you make the floor spotless.

Let’s dive in and find out how we can keep the floors squeaky clean.

Vacuum out the dirt once in a week

Vacuuming might seem tiring; therefore, we are recommending it to perform only once in a week. But, do it whole-heartedly. Vacuuming takes time, so make sure you are doing it enough to get rid of all the surface dirt and dust. If you are doing it once in a week, it will take around one hour for a thorough cleaning.

No shoes inside policy

One of the best ways to keep the dirt away is following no-shoe policy inside your house. You may sound rude to your guests while asking them so, but believe me; this will take off your headache of dirty floors. Also, it will keep the harmful bacteria that may enter the house from the muddy and soiled shoes and make you and your kids ill.

Keep an eye on trouble areas

There are many areas in the house that welcome bacteria. One of them is the kitchen, where the crumbs of leftover food tempt harmful bacteria to invade. Similarly, muddy footprints in the hallway, pets’ hair and stagnant water in the washroom, and near sink call for regular clean up to avoid getting sick.

Kitchen

De-clutter your space

When the room is full of clutter, dirt and dust get accumulated. Therefore, the foremost thing you should do is de-cluttering your space. Remove all those things that are uselessly lying on the floor. A better way is to organize them properly so that whenever you clean the floor, you get a clear space. Once the unnecessary things find their right place, less dirt accumulates, and you can vacuum the area properly.

Treat different floors differently

There are different types of floor, and each floor requires different cleaning techniques. You have to find out the right strategy and routine for vacuuming different kinds of floorings.

Laminate floors

The best way to clean a laminate floor is by using a vacuum cleaner or dry mopping. When using the machine, make sure it is in tile mode for the best result. You should not polish a laminate floor.

Cork floors 

Cork floors are porous, and this is what gives them beauty as well as make them susceptible to water damage. In such floors, you have to vacuum often to prevent scratching. Make sure you wash the spills immediately and clean it once in a week.

Hardwood floors

There are two types of finishing in hardwood floors- wax and polyurethane. You have to protect the wax-coated hardwood floors from water damage specifically. Use completely wrung out the damp mop and dry microfiber cloth to clean such floors.

Bamboo floors

Bamboo floors look classy and elegant. At the same time, they are more prone to scratches and nicks than a hardwood floor. Therefore, you have to be extra cautious while cleaning them so that they remain scratch-free and mark free. Special cleaning formula and lightly damp mop will suffice. Wipe off the excess moisture with a dry microfiber cloth.

Linoleum floor

Such floors are made up of linseed oil, resin, limestone, wood fiber, and cork dust. Later, mineral pigments are used to bring the colors. You can clean the linoleum floor with a damp microfiber mop and afterward air-dry it immediately. If the floor still seems sticky, just swipe it to another clean to get the shining look.

Vinyl floor

The vinyl floor can get a fresh look using a special vinyl floor cleaning solution and dry mop technique. You can damp cloth in the solution and later air-dry it. You may also use a steam cleaner to get rid of stains. A steam cleaner works on both tile and grout and remove the stains and can kill the bacteria as well.

So these are some of the most effective and best ways to keep the floor clean every day. If you include these practices on a daily routine, believe me, cleaning will not seem a tiring job, but something that you will enjoy.

How to Clean Up Cat Litter on Carpet?

Who doesn’t love keeping his/her kitten at a clean, safe, and comfortable place? At the same time, none wants to make his/her precious carpet messy and grimy.

When both of the issues are important here, you need to know how to clean up the cat litter on the carpet.

Cat Litter

Owning a cute cat is certainly a matter of great amusement. It offers you a lot of fun inside or outside of your home. Your beloved kids pass quality times with the pets. And you also have a good deal of company to battle your boredom.

However, it looks for a conspicuous caring, while you are using the litter on the carpet. Your good-looking floor carpet may fall into foul one due to litter messes. And sometimes, it spreads odor and causes uncomfortable feelings throughout the room.

Furthermore, due to little care, cat litter can generate germs and bacteria inside the carpet. And it may cause serious health complications for your beloved family members and the cat itself. Considering all of these issues, here we are approaching a way relief of the great grief. So, let’s have a look at the guideline of cleaning cat litter on the carpet inside your home.

Tips & Techniques to Clean Cat Litter on the Carpet

While you are thinking of owning a cute kitten and living with it in a well-carpeted house, you should take care of both your cat and carpet. You would never love living in a messy room and keeping your cat in an unhealthy environment. That’s why; you need to know the proper ways of cat litter cleaning on the carpet.

01: Using a Paper Towel

Your first cleaning step would be through placing an extra towel under the cat litter. Cats usually love spreading the litter contents by their paws. And they move around the carpeting floor with their soiled paws. And most of the cat litters cannot ensure 100% absorption of urine or anymore liquid.

Therefore, you feel an unhygienic and uncomfortable environment in your room. You can easily avoid this unwanted situation, just installing a paper towel under the litter. It may take an extra expense but gives you more comfort around the clock.

02: Let Cat Litter to Dry Up

If you are an experienced cat litter user, you know that wet litters generate germs and bacteria. And it causes bad smell through the room. At the same time, your wet carpeted floor can create serious health issues for kids and cats themselves.

Therefore, never miss drying your cat litters under solid sunshine. It will ensure the overall fair condition of your cat litter and carpeted floor.

03: Clean the Surface Layer

You have to pay special attention while cleaning your cat litter on the carpeted floor. Use a handy brush to clean the surface layer of the cat litter. And try to fall the dirt and dust down the paper towel. Later, it will let you dump in the dustbin where you like.

When you are cleaning the surface floor, don’t forget to keep it away from the touch of your kids or kitten. It may create a potential threat to the surrounding environment too.

04: Vacuum the Cat Litter Area

After cleaning the surface layer of the cat litter, now you need to tidy up the surrounding area of the cat litter. Use a carpet-friendly vacuum cleaner to eliminate all forms of dust, dirt, and trash. In the market, you will find pet vacuum cleaner to do the job.

With the pet vacuum cleaner, you can prevent dirt from going into the carpet fibers. And it will give you relaxation in keeping the overall environment healthy and clean.

05: Sterilize Around the Litter

Once you are getting the litter out of the carpet, it would be tough for you to trace the microscopic trash and dirt hidden in the carpet fibers. Over time, it causes germs and harmful bacteria inside the carpet. Besides, it has much chance to have cat urine mixed in the carpet fiber.

In this particular issue, I will recommend you using an enzymatic cleaner to tackle the formulation of bacteria. And it will help you to keep the corner free from ammonia odor.

How to Protect Carpet from Cat Litter Mess

When you are planning or already passing your valuable time with a cute kitten, you need to be a bit conscious of the fairness of the floor. And if the floor is carpeted, it requires much more attention than anything else. Here, I would like to share with you some preventing measures of litter mess contamination.

Use a Good-Quality Litter Box: Install a premium litter box to make the moment enjoyable. It will give you an endurable service for the whole day. Talk to the litter box suppliers, and pick the right one for your lovely kids.

Use a Litter Box Lid: With a litter box lid, you can easily take control over the cat messes. Use the lid to prevent spreading the litter items around the carpet surface. It would be handy enough to keep the carpet in a fair condition. You can buy the box lid separately and use it when you want.

Use Plastic or Cardboard: Using the cat litter on the carpet is more troublesome than anywhere else. It posses health hazards and damages the carpet. To avoid these unwanted circumstances, you can use square-size plastic or cardboard to put the litter on it. It will certainly make the matter much easier than ever.

Clean the Litter Box Regularly: No options for frequent cleaning to maintain a coherent condition of the carpet. If your cat doesn’t get a clean environment in the litter box, it will use the carpet surface for urination and evacuation. Then, it would be a serious problem to maintain a neat and clean environment.

Last but Not Least!

Cat litter on the carpet is an issue in your life. But when you are with the cleaning guideline, having a company with your cute kitten is not a big deal. For confirming the clean carpeted floor around the clock, we hope this review will help you a lot. Have a happy day with your caring cat!

How to Remove Stains from Concrete Floor

There are times when you feel that getting stains off your concrete floor has become a tireless job that you just have to keep doing without much of a reward. But it does not have to be that way. Rather, you can actually have a much easier time dealing with stains on concrete floors.

You want to know how? Well, we have just the right ingredients you need for an easy job. And after reading this article, you will feel like you have sufficient knowledge to tackle the floor situation on your own very well.

So, let’s get to learn how to remove stains from concrete floors.

How to Remove Stains from a Concrete Floor

Here we will discuss what you will have to do to clean and remove stains from your concrete floor, and then we will also look into a few tips and tricks so that the floor can be protected from harm or damage.

Step 1: Line up All the Supplies

Before you are to start any type of work, it is essential that you set aside the items you are going to need. Much like you do for cooking, you measure everything out and keep them all in the same place so that you do not have to keep looking for what you need.

Stain Cleaner

The same goes for cleaning the floors. You have to select the equipment you will use for the cleaning and the supplies. In this case, you will need a broom, nylon brush, and some type of solution. The kind of solution you choose will depend mainly on the type of stain you are dealing with.

Step 2: Move Items away from the Area You are Cleaning

Now, for you to be able to have complete access to the floor you have to clean, it is very important to ensure that there is nothing placed on it. Therefore if there is a carpet, furniture, or other items placed on the concrete floor that needs cleaning, then set them aside.

Otherwise, you will have to do double the work as you have to constantly work around the items and be careful not to get water on the furniture or carpet.

Step 3: Clean the Dirt and Dust off the Floor

Before you start the work with water and solution, you must first make sure there is no dirt or debris on the floor. If there is, then you will have a harder time removing the stain.

So, to rid your floor from the dust, you can either choose to use a broom or even a vacuum cleaner. I would personally recommend a vacuum cleaner as it will be much faster than a broom. But, both of them will do a fine job on the surface.

Step 4: Remove the Stain with the Spot Treatment

At times it is very important for you to moping the concrete floor to make sure you have a clean and hygienic environment. But there are times when a mop is just not enough for a clean-up job, that is especially true for stains. These will require the use of different solutions.

  • If the marks or stains you are dealing with is normal, then all you need to do is mix water and some dish soap together 1:13 ratio. And then just scrub the floor with it.
  • For an oil-based stain, you do not need to dilute the mixture, rather first wet the spot and the take the dish soap on a brush to scrub it off. Later use a rag to dry the wet spot.
  • Grease stains are the hardest to remove as it involves a rather lengthy process. What you have to do is sprinkle corn-starch on the affected area and keep it there for three to four days. After that, you have to either a broom or vacuum the powder off.

Step 5: Tougher Solution

In most cases, you have to be careful about how harsh the solution is as it might damage the concrete floor. But that does not have to be the case for the plain concrete floors. You can be harsher with the solution and mixture as they are safe from damage.

Also, you can even clean this type of concrete with bleach, and that should be fine. However, just because your floor is safe does not mean your hands are as well. So keep in mind to put in a pair of gloves before you get to work.

Keep the Concrete Floor Protected

Prevention is always better than cure, and that is one rule we must follow for the concrete floors as well. It is better to make sure the floor does not develop any type of stain, so you do not have to work to get it off. So for that, there are a few things you can follow.

Tips 1: Apply Wax on the Concrete

The concrete is a very rough surface, so by applying a wax finish, you will be smoothing out the roughness. All the while, you will also be applying a protective layer on top. The smooth finish will enable you to clean it faster, and you will also have less stress about the stain.

Tips 2: Wipe away the Spillage

The reason why we experience food stains on the concrete at times is that we allow the food to dry up on the floor before cleaning it up. That drying process leaves a stain on the floor. So, if you wipe away whatever falls on the floor, then you can easily avoid stains.

Conclusion

Most of the time, cleaning up any type of stain can involve a lot of labor and hard work. But, all this is worth it when you have clean and presentable floors. Just use the right technique and products, and you should be good to go!

Best Way to Clean Laminate Floors Naturally

Do you often get confused about what products to use and how to clean the laminate floors? Well, you are not the only one; there are many people out there who happen to have the same questions regarding the situation.

But thankfully, you have come to the right place. There is no need to look any further as we have all the answers to your questions regarding cleaning up your laminate floors.

If you want to know the best way to clean laminate floors naturally, then just keep reading!

How to Clean a Laminate Floor

Cleaning the floor is a fairly easy task to accomplish, and there are mainly only three parts in the whole cleaning process.

Choice of Solution

First, we need to help you with the choice of solution.

Vinegar Solution

You will see that, in most cleaning processes, vinegar is a common staple. That is mainly because its properties are very good for cleaning, and the whole process is natural. By using the vinegar, you can avoid harsh chemicals on your floors.

Vinegar

Now, to make the solution, you will have to add half portion water and half portion vinegar. To add a bit more moisture and cut down the acidity, you can mix a few drops of oil to the solution.

Tea-Based Cleaner

Another very popular choice when it comes to natural cleaning solutions is tea. In this case, you can use a regular tea bag and submerge it in some hot water until the water and tea are completely incorporated.

After this, all you have to do is transfer the content to a spray bottle for easier application and use of the solution.

Baking Soda Solution

There are times when you will see some very tough stains of food on the floor, and for those stains, a baking soda paste is the most effective.

You will either have to add a bit of water to the baking soda or some vinegar until the powder becomes a type of a paste. From my experience, I can say that the vinegar will give you better results than water.

The Cleaning Process

We have already seen the few types of solutions that can be used to clean the floors, and we have decided upon the one which will be right or perfect for our work. So now, we can move on to the real task in hand and get to know how to do the cleaning.

Step 1: Sweep or Vacuum the Floor

Before you can clean the laminate floor with any type of solution, you have to make sure that the floor does not have any dust or dirt. Those will get in the way and make the whole job a lot lengthier. Be sure to go over the same area a few times to ensure that it is actually clean.

Step 2: Prepare the Solution

If you are not using a store-bought solution, then it is important for you to make it at this point. But, if you have one prepared beforehand, then you will have to shake it up so that the content inside is mixed properly. Because many times we see the heavier elements fall to the bottom.

Step 3: Do a Test Run

Even though you are using a natural cleaner to clean the floor, there are times when your laminate floor might not react to the solution the way you want it to. So, to avoid any discoloration on a huge section of the floor, you should test it out, starting from the corner.

Step 4: Apply the Solution on the Floor

If the solution of your choice is liquid, then you can pour it into a spray bottle and spray it on the floor, but if you choose a paste, then you will have to apply it on the spot using your hands or a rag.

You have to keep in mind to dampen the floor and not drench it with the solution. So, spray in a way so that there is a mix all across the floor and not a puddle.

Step 5: Wipe and Dry the Area

Your next step would be to take out a micro-fiber fabric and start wiping the area where you applied the solution or mixture. Keep wiping the spot until you are sure there is no more liquid or moisture on the floor. Leaving it on the floor for too long might lead to discoloration.

Also, the micro-fiber material is important in this case as it will ensure no streaks or marks are left on the floor by the fabric.

Step 6: Prepare the Fabric for Future Use

The micro-fiber cloth is not only for single-use, rather you can keep putting them to work until you see they do not perform the way they used to before. This is also true if you choose to use a mope to dry the damp spots. The pads at the bottom can be reused.

But, in order to reuse the pads or the cloths, you will have to do some washing and rinsing. After the wash, just dry them up, and they will be good as new.

Caring for the Floor

Cleaning is not the only important factor when it comes to your laminate floors. You will have to care for them so that your cleaning process becomes less stressful.

Wipe before the Floor is Stained

The best way to ensure that the floors don’t have any stains is to wipe it immediately when something falls. This way, you will have to spend less time trying to scrub the marks off the laminate floors.

Use Professional Help

There are certain times when we are just not able to do the job the right way. Or there are some marks or stains on the floor that are too difficult for us to remove or wipe by ourselves.

So, in cases such as these, you can always call professionals who are more experienced and have more knowledge about the task in hand. The whole thing will be less time-consuming for you.

Final Thoughts

You will find cleaning the laminate floors very easy using all-natural and kitchen items. All you really need is to know how to make the solution and which step comes after the other. And you will be done in no time.

How To Clean Concrete Floors [Your Home Remedies]

Gone are the days when people used to have concrete floor only in the basements, yards, patios, or driveways. Today, with the urge to do something unique and more artistic, concrete floors are becoming a thing of indoor. You can find houses where concreting is done at countertop and floors to bring the more classic and cool look. Apart from residential areas, concrete floors can be easily found in commercial, industrial, and institutional places.

Today we will learn how to clean concrete floors and bring them the desired sheen.

Benefits of concrete floors

There are multiple advantages that are dragging people to get concrete floors. Some of them are listed below. 

  • Durable
  • Stiff enough to take the heavy load
  • Energy efficient
  • Construct easily and quickly
  • Resistant to dampness
  • Fire resistant

However, one of the few limitations of a concrete floor is its cleaning. So here, we will discuss how to clean concrete floors with fewer efforts and more effectiveness.

Know the finishing of your concrete floor

Concrete floors may have different types of finishing, like sealed, polished, stained, stamped, painted, and unsealed. Each finishing requires a different kind of cleaning to get the best result. However, one thing that you should always keep in mind is cleaning the stains and spills from the concrete floors as soon as possible. Once the spills get dry, they become too stubborn to get rid of.

Let us discuss the major concrete floorings and the ways we can clean them and bring back the new look.

How to clean sealed concrete floors

Coated with acrylic resins, urethanes or epoxies, sealed concrete floors are generally nonporous and resistant to stains. Therefore, cleaning them is not a very tedious task. All that you need is dishwashing liquid from a good brand and water.

The steps involved are:

  • Firstly, sweep out the dust and debris from the surface using a broom, dust mop, or vacuum cleaner.
  • Take dishwashing liquid and mix it with water depending upon the size of your floor. 2 teaspoons of dishwashing liquid mixed in two gallons of water is sufficient to clean a large area. Now wet mop the area with the solution.
  • Now rinse off the soapy solution from the floor with the help of clean water and let it dry. You may need to reseal it as per the instructions of the installer.

Note: Make sure you do not use harsh cleaners as they may dull and break down the sealant, stealing the beauty of sealed concrete floor completely.

How to clean polished concrete floors

With their polished look and glossy finish, concrete floors look the best and are easiest to clean. The best part is you don’t have to reseal it after cleaning. You just need a dust mop or vacuum and a wet mop to clean a polished concrete floor with a commercial polished concrete cleaner.

The steps involved are:

  • Use a vacuum cleaner or dust mop and remove the dust and debris from the surface.
  • Take the commercial cleaner and damp mop the floor with it. Generally, rinsing with clean water is not obligatory with a polished concrete floor.

How to clean painted concrete floors

There could be sealed, or unsealed surface is a painted concrete floor. Therefore, before starting the cleaning process, make sure you have to safeguard the paint as well as sealant to get damaged. The thumb rule is using a safe and non-acidic cleaning agent.

The steps involved are:

  • Like in every concrete flooring, use a vacuum cleaner or dust mop to remove the dirt and other surface grit completely.
  • Take a mild cleaning solution and mix it with lukewarm water. Now damp a microfiber mop in the solution and start wet mopping gently. Here, make sure you use microfiber mop only and moisten it lightly; otherwise, the chances of peeling of the painting may rise.
  • Lastly, remove the soapy residue by mopping with clean water and let the floor dry.

How to clean unsealed concrete floors

Unsealed concrete floors are majorly found in sidewalks, patios, garage floors, and basement. The surface of such floors is naturally porous and more susceptible to liquid stains. Also, being outside, they get soiled easily. However, good cleaning makes them look nice.

Cleaning an unsealed concrete floor is a tedious job. In order to remove different types of stains, you need to put extra effort into getting the best result. Therefore, we will discuss how to clean unsealed concrete floors in more detail.

Things required

  • Trisodium phosphate
  • Stain remover
  • Water
  • Broom
  • Bucket (you may also use a garden hose)
  • Pressure washer
  • Rubber gloves

The foremost step is removing the loose dirt and debris from the surface, either with the help of a broom or vacuum cleaning device. Once the dry dirt is removed, make a mixture of trisodium phosphate and water and fill this solution in the pressure washer to clean the entire area. Make sure you are wearing rubber gloves.

Later, bring hygiene in the place by removing any residual remains. Rinse the surface thoroughly with clean water and allow it to air dry.

How to remove the grease stains from the concrete floors

Greases stains are very common in the garage and basement. You can get rid of them by layering the greased areas with cornstarch. It takes around 2-3 days by cornstarch to absorb the oil as unsealed concrete floors are porous, and oil goes deep. After 3 days, vacuum it away and get a clean surface.

Removing different types of stains from concrete floors

  • For the food and beverage stains, you can use dishwashing liquid mixed with water. Scrub off the marks of stains and spills and rinse with clean water. Repeat, if required.
  • If there are rust stains on the concrete floor, you can use distilled white vinegar. Apply it over the marks for around 30 minutes and scrub off. Later, rinse with clean water to get the shinning floor.
  • For mildew stains, you can use powdered laundry detergent, trisodium phosphate, or chlorine beach with water to scrub off then off and get a fresh and new looking concrete floor.

Final Words

A properly clean and tidy concrete floor looks amazing and enhances the look of the area. Therefore, no matter how rough a concrete floor is, make it clean to reveal its true beauty.

1 2 3 8